Blog
Blower Assembly and Start
Release time:
2025-02-08 12:09
Source:
ASSEMBLY
INSTALLING PIPE B：
Put blow pipe B to the machine by rotaing.
INSTALLING PIPE A：
Put blow A to Bby rotating.
OPERATION
PREPARATION：
Mix gasoline and two-stroke engine oil in a ratio of 25:1 or 40:1.
Do not directly mix gasoline and oil in the engine fuel tank.
Mix only the amount needed for the job, and do not use fuel that has been stored for more than two months.
STARTING COLD ENGINE：
Figure 1: Start Steps
STARTING WARM ENGINE：
Open the choke to the extended position, and repeat step 5 of STARTING COLD ENGINE now should be ready for use.
STOPPING THE ENGINE：
Cool the engine by allowing it to run at idle for 2 to 3 minutes.
Stop the engine by pulling the stop switch.
Preceding page
Next page
Latest News
Europe, Africa, Oceania Market
E-mail: georgewang@grepo.cn
Asia, South America and other market
Email: wendyxu@grepo.cn / bettyxu@grepo.cn
Complaint: davidgong@grepo.cn
WeChat public
Whats App