Blog
Blower Maintenance
Release time:
2025-02-08 11:18
Source:
MAINTENANCE
Every 10 hours：
1. Loosen the air cleaner cover retaining screw, and remove the cover and filter element.
2. Inspect the element. If the element is distorted or damaged, replace it with new one.
3. Wash the element and air cleaner cover in clean fuel, and squeeze or blow dry.
Every 15 hours：
1.Use the spark plug wrench to remove the spark plug.
2.Clean and adjust the spark plug gap to 0.6-0.7mm. Replace any damaged or visibly worn plug with a champion RCJ6Y or equivalent.
3. Install the spark plug finger-tight in the cylinder head, and then tighten it firmly with the spark plug wrench. If a torque wrench is available, torque the spark plug to 148-165 inch pounds.
Every 50 hours：
INSPECTION Inspect the entire machine and tubes fordamage, including loose or missing components, and repairas necessary.
SPARK PLUG Replace the spark plug with a championL9T(LD), gapped to 0.6-0.7mm.
FUEL FILTER Use a wire hook to extract the fuel filter, and then remove and wash the filer element in clean fuel. Before reinstalling the filter, inspect the condition of the fuelline. If damage or deterioration is noted, the vacuum should be removed from service until it can be inspected by a trained service technician.
STORAGE
CLEANING Thoroughly clean the machine exterior.
FUEL Drain the fuel tank, and the clear the carburetor and lines by running the machine until it stops from lack of fuel.
LUBRICATION Remove the spark plug, and then pour approximately 1/4-oz of oil into the cylinder through the spark plug hole. Before reinstalling the spark plug, pull the recoil starter 2 to 3 times to distribute the oil over the cylinder walls.
AIR CLEANER Remove, clean, and reinstall the filter element as described before.
Preceding page
Next page
Latest News
Europe, Africa, Oceania Market
E-mail: georgewang@grepo.cn
Asia, South America and other market
Email: wendyxu@grepo.cn / bettyxu@grepo.cn
Complaint: davidgong@grepo.cn
WeChat public
Whats App